To ship a Pokémon card safely, put it in a penny sleeve, slide that into a toploader, seal the top with painter’s tape, sandwich it between two pieces of cardboard, and mail it in a bubble mailer with tracking. That method costs very little in supplies and protects against the two things that ruin cards in the mail: bending and moisture.
What you need
- Penny sleeves: thin soft sleeves that stop surface scratches
- Toploaders: rigid plastic holders, or semi-rigid card holders
- Painter’s tape: low-tack tape that peels off cleanly
- Team bags or small zip bags: to keep water out
- Cardboard: cut from any shipping box
- Bubble mailers: size 000 or similar fits a few toploaders
Step by step: shipping one card
- Sleeve the card. Use a new penny sleeve so the surface can’t get scratched.
- Put it in a toploader. Slide the sleeved card in with the sleeve’s open end going in first, so the card can’t slip out of the sleeve, and tap it gently to the bottom.
- Tape the top. Use one strip of painter’s tape across the opening and fold a corner over to make a pull tab. Don’t use clear office tape or packing tape. It leaves residue, and buyers sometimes damage the card trying to get it off.
- Bag it. A team bag or zip bag keeps rain out.
- Add cardboard. Tape the toploader between two pieces slightly bigger than it is, so it can’t flex.
- Use a bubble mailer. Seal it well and write “Do Not Bend” if you like, though the cardboard does the real work.
Shipping several cards
- 2 to 4 cards: one toploader each, stacked and taped together so they can’t slide against each other, then cardboard on both sides.
- A playset or small lot of cheap cards: sleeve them, stack them between two toploaders, and tape the bundle. Don’t force several cards into a single toploader.
- Dozens of cards: use a small cardboard box with padding so the stack can’t move.
- Bulk lots: pack rows tightly in a card storage box, fill gaps with paper, and put that box inside a shipping box. See how much bulk Pokémon cards are worth.
Shipping graded cards
A graded slab can crack if it’s dropped. Put it in a slab sleeve, wrap it in bubble wrap, and ship it in a box, not a flat mailer. For expensive slabs, add insurance and require a signature.
Plain envelope or bubble mailer?
| Method | Cost | Tracking | Use it for |
|---|---|---|---|
| Plain envelope with a stamp | Lowest | No | Cards worth a few dollars |
| Marketplace envelope service with tracking | Low | Basic | Low-value cards, where the platform offers it |
| Bubble mailer, tracked | Medium | Yes | Most cards |
| Box, tracked and insured | Highest | Yes | Graded cards, expensive cards, big lots |
A plain envelope is fine for cheap cards, as long as buyer and seller accept the risk. Put the card in a penny sleeve and a toploader or a folded piece of thin cardboard, tape it to a sheet of paper so it can’t slide, and keep the envelope thin and flexible enough to go through sorting machines. Stiff or lumpy envelopes can cost extra or get torn.
For anything you’d be upset to lose, pay for tracking. Without it you have no proof of delivery if a buyer says the card never arrived.
Common shipping mistakes
- Tape touching the card or sleeve. Tape only the toploader.
- A toploader loose in an envelope. It can punch through the paper in a sorting machine.
- No penny sleeve. A bare card in a toploader gets scratched as it moves.
- Rubber bands around cards. They dent edges. See how to store Pokémon cards.
- Too little postage. Weigh the package. The buyer shouldn’t have to pay on delivery.
- No record of the card. Photograph the front and back before you pack it.
Insurance and signature
Add insurance when the card’s value is higher than the carrier’s included cover, and require a signature for high-value cards. Marketplaces often have their own rules about tracking and signatures for seller protection, so check them before you ship an expensive sale.
Shipping internationally
Fill in the customs form honestly, with a description such as “trading card” and the real sale value. Delivery takes longer and tracking can stop at the border, so use a tracked service and tell the buyer what to expect. Some marketplaces offer an international shipping program that handles customs for you.
Before you ship, record the condition
Condition disputes are the most common problem after a sale. Take clear photos of the front, back, and corners, and describe the card honestly using the condition guide. For the rest of the selling process, see how to sell Pokémon cards online or, for swaps, how to trade Pokémon cards online.
Know what you’re shipping
How much protection a card needs depends on what it’s worth. ScanDragon scans a card, finds the exact printing, and shows its market price, so you know whether it belongs in a plain envelope or an insured box.
Check the price first: try the free Pokémon card value checker.